Spitfire 885T Shark Cat Aluminium Boat Trailer – 7.5 to 8.3 Metres

The Spitfire 885T Shark Cat Aluminium Boat Trailer is designed for shark cat boats measuring approximately 7.5 to 8.3 metres. Manufactured in Queensland, Australia, this heavy-duty trailer features a 4500kg Aggregate Trailer Mass (ATM) rating and a tri-axle configuration.

Its 6061-T6 anodised aluminium construction provides a lightweight structural foundation, while marine-grade 316 stainless steel fittings are selected for marine environments. The trailer also features torsion suspension, DEEMAX disc brakes across all axles, and sealed submersible LED lighting.

Designed to accommodate the wider beam and weight distribution of shark cat hulls, the Spitfire 885T includes wobble rollers, extended skid rails, and a 1000kg machined stainless steel winch. It supports both drive-on and winch-on loading configurations.

Spitfire 885T Shark Cat Aluminium Boat Trailer Features

The Spitfire 885T combines a heavy-duty tri-axle design with marine-oriented materials and practical loading equipment.

6061-T6 Anodised Aluminium Construction

The trailer uses 6061-T6 anodised aluminium for its chassis construction. Its bolted design uses no chassis welds and includes eight crossmembers in total, including the axle positions.

Key construction features include:

6061-T6 anodised aluminium
Bolted chassis construction with no chassis welds
Marine-grade 316 stainless steel fixtures and fittings
Stainless steel posts and brackets
Tri-axle configuration
Torsion suspension
Dacromet corrosion protection
Rolled aluminium guards

This construction is designed for marine trailer applications and the transportation requirements of compatible shark cat boats.

Tri-Axle Torsion Suspension

The Spitfire 885T features a tri-axle torsion suspension configuration. Its three-axle design is intended to support the trailer’s higher rated load capacity and distribute weight across the running gear.

The supplied specifications list:

Three axles
Torsion suspension
Dacromet corrosion protection
4500kg chassis rating
4500kg ATM

Confirm the final load distribution and towing requirements with the supplier before purchase.

DEEMAX Disc Braking System

The trailer features mechanical DEEMAX disc brakes across all axles. Its braking specification requires an electric-over-hydraulic brake actuator, such as an IQ7 or similar compatible system.

Standard braking details include:

Mechanical DEEMAX disc brakes
Brakes on all three axles
Electric-over-hydraulic brake actuator required
Steel rotors and calipers as standard
Optional full stainless steel brake components
Optional DEEMAX Decromat calipers
Optional DEEMAX Decromat rotors

An IQ7 hydraulic brake system is listed as an available supplied and installed option. Confirm the complete brake controller and actuator requirements with the supplier and your towing vehicle manufacturer.

Submersible LED Trailer Lighting

The Spitfire 885T includes sealed submersible LED lighting for marine trailer use.

Lighting features include:

Main submersible LED lights
Side LED lights
Sealed light units
7-pin flat connector
Round and big-round connector options available on request

Confirm the connector type required by your towing vehicle before ordering.

1000kg Stainless Steel Winch

The trailer includes a 1000kg machined 316 stainless steel winch. Its loading configuration accommodates both drive-on and winch-on arrangements.

Additional loading features include:

1000kg machined stainless steel winch
Wobble rollers
Extended skid rails
Two sets of rear bunks as standard
Front rollers
10-inch galvanised jockey wheel
Optional drive-on guides

The standard rear bunks and front rollers can be changed to suit the boat. Confirm any requested adjustments with the supplier and ensure they appear on the final quotation or invoice.

14-Inch Machined Alloy Wheels

The Spitfire 885T features 14-inch machined alloy rims with 195R14 tyres, as listed in the specifications.

Additional exterior features include:

Machined alloy wheel design
Rolled aluminium guards
10-inch galvanised jockey wheel
Optional spare wheel and mounting bracket

Wheel designs supplied may differ from product photographs depending on available stock.

Spitfire 885T Shark Cat Aluminium Boat Trailer Specifications

The following table summarises the supplied dimensions, weight ratings, materials, and equipment.

Specification	Details
Make	Spitfire
Trailer Model	885T-4500
Suitable Boat Length	7.5–8.3 metres
Chassis Rating	4500kg
ATM	4500kg
Tare Weight	840kg
Desirable Minimum Towball Weight	300kg
Boat, Motor and Fuel Weight Allowed	3660kg
Trailer Chassis Length	8850mm
Trailer Width	2490mm
Width Between Guards	2010mm
Keel Height Above Ground When Loaded	420mm
Engineering Design Assurance	FEA / MVA1989-VSB1
Aluminium Grade	6061
Aluminium Temper	T6
Aluminium Protection	Anodised
Fixtures and Fittings	Marine-grade 316 stainless steel
Axles and Suspension	Tri-axle / torsion
Corrosion Protection	Dacromet
Construction	Bolted, with no chassis welds
Lighting	Sealed submersible LED main and side lights
Light Connector	7-pin flat; round and big round available on request
Winch	1000kg machined 316 stainless steel
Trailer Configuration	Drive-on or winch-on
Brake Type	Mechanical DEEMAX disc brakes on all axles
Electric-Over-Hydraulic Actuator	Required – IQ7 or similar
Brake Material	Steel; optional full stainless steel
Wheel Rims	14-inch machined alloy
Tyres	195R14
Guards	Rolled aluminium
Jockey Wheel	10-inch galvanised
Crossmembers	8, including axle positions

Available Spitfire 885T Trailer Options

Buyers can select additional accessories and upgrades to suit their boat and towing requirements.

IQ7 Hydraulic Brake System

An IQ7 hydraulic brake system is available as a supplied and installed option. The detailed specifications state that an electric-over-hydraulic actuator is required for the braking configuration.

Confirm the actuator, brake controller, and vehicle compatibility before ordering.

DEEMAX Decromat Calipers and Rotors

Optional DEEMAX Decromat calipers and rotors are available as brake-component upgrades. Full stainless steel brake components may also be selected.

Three Drive-On Guides

Three drive-on guides are listed as an available option. They can assist with positioning a compatible boat during loading.

Spare Wheel and Mount

A spare wheel and mounting bracket can be added to the trailer. Confirm the wheel specification and availability with the supplier.

Other available options include:

IQ7 hydraulic brake system
DEEMAX Decromat calipers
DEEMAX Decromat rotors
Three drive-on guides
Spare wheel and mount
Full stainless steel brake components

Ensure all selected accessories and upgrades are listed on the final quotation.

Boat Fitment and Customisation

The Spitfire 885T comes standard with two sets of rear bunks and front rollers. These components can be changed to suit the boat being transported.

Keel raising is available to achieve additional height, but it is not included in the standard purchase. Boat fitment and other modifications are also excluded unless specifically listed on the quotation or invoice.

Before ordering, provide the supplier with your boat’s dimensions, hull configuration, and loading requirements. This helps confirm whether the standard trailer setup is suitable.

Why Choose the Spitfire 885T Shark Cat Aluminium Boat Trailer?

The Spitfire 885T combines a 4500kg ATM rating with tri-axle torsion suspension, anodised aluminium construction, and marine-grade stainless steel fittings.

Its DEEMAX disc brakes, 1000kg stainless steel winch, submersible LED lighting, wobble rollers, and extended skid rails provide practical equipment for compatible shark cat boats.

For boat owners seeking a heavy-duty aluminium trailer for a shark cat measuring 7.5 to 8.3 metres, the Spitfire 885T is a practical option to consider.

Contact the supplier to confirm boat compatibility, brake actuator requirements, available options, pricing, and delivery arrangements before purchasing.